KD Scientific syringe pumps are ideal for delivering accurate and precise amounts of fluids for a multitude of syringe pump applications including infusing calibrant into a mass spectrometer or reaction chamber, long term drug infusions to animals and general infusion applications.
KDS syringe pumps are known for their outstanding reliability and performance. The KDS 100 series syringe pumps give you the most cost effective solution for infusing fluids. Alternatively, the KDS 200 series gives you the advance features with RS232 and TTL interfaces. All the KDS 200 series pumps can be daisy chained together to create a syringe pump network.
Syringe pumps with infuse and withdraw capabilities provide maximum flexibility for varied applications. This feature permits applications such as automatic withdrawal of samples and unattended filling of syringes, fluid level adjustments with continual infusing and withdrawing and the infusing of drug or nutritional materials and diffusion into chemical reactors.
Continuous flow can be achieved using a syringe pump simply by adding a 3 way valve. A push/pull style syringe pump can continuously cycle allowing two syringes to dispense fluid while the opposite two syringes are refilling. When the end of one cycle is reached, the pump reverses and the delivery continues. This method will allow a pump to deliver continuously 24/7.
The new KD Scientific EZFlow Pump Series, is a line of economical pumps for simple infusions and dosing applications. The pumps are designed to combine high levels of performance together with ease of use and reliable operation. KD Scientific EZFlow products offer a complete line of pumps to meet many different applications. Micro-infusion pumps, volumetric infusion pumps, syringe pumps, portable pumps and disposable pumps are available at affordable prices.
Infusion Syringe Pumps
Infusion & Withdrawl Syringe Pumps
Dual rating Syringe Pumps
EZFlow Syringe Pumps
Continues Syringe Pumps
Features
- Syringes from 10 µl to 140 ml, any manufacturer
- Simple menu-driven setup:
- Select syringe size from displayed table
- Set dispense volume
- Set dispense flow rate
- Easy to read bright, backlight display
- Dispense volume displayed and has automatic shutoff at completion
- Volume and flow rate units (µl/hr or ml/hr) are selected automatically based on syringe size
- Last settings stored in permanent memory
- Button release of drive nut for easy syringe installation
- Choice of run / stop after a power interruption
KDS Legacy Series Syringe Pumps
NEW LEGACY™
series syringe pumps
New EZFlow 2050 Syringe Pump
- Typical Accuracy +-5%
- Flow Rate options 1 to 10 ml/hr
New KDS 510 Pump Systems
- Dispense volume displayed and has automatic shutoff at completion
- Last settings stored in permanent memory
New KDS 520 Pump Systems
- Volume and flow rate units (µl/hr or ml/hr) are selected automatically based on syringe size
- Dispense volume displayed and has automatic shutoff at completion
NewEZFlow 2020 Syringe Pump
- Typical Accuracy +-20 seconds
- Broad Infusion Capability
New EZFlow 2030 Syringe Pump
- Typical Accuracy +-2.0%
- Linear Flow Rate 0.1 - 99 mm/hr
New EZFlow 2040 Syringe Pump
- Typical Accuracy +-2.0%
- Flow Rate Range 01 to 1200 ml/hr
KDS230 infuse and withdraw Syringe Pump
- No. of Syringes: 2, 4, 6, 8 or 10
- Syringe Size: Up to ten syringes, 10 µl – 10 ml ea
- One to six syringes, 20 ml – 60 ml
- One to four syringes, 100 ml – 140 ml
KDS310 infuse and withdraw Syringe Pump
- No. of Syringes: 1
- Syringe Size: 0.5 µl - 250 µl
Gemini 88 Dual infuse and withdraw Syringe Rate pump
- Continuous delivery 24/7
- Wide variety of syringes from 0.5 µl - 140 ml
KDS 410 High Pressure Syringe Pump
- No. of Syringes: 1
- Syringe Size: 10 ml - 140 ml ea.
KDS101 Infuse Only Syringe Pump
- No. of Syringes: 2
- Syringe Size: 10µl - 10ml ( two syr)
KDS200 Infuse Only Syringe Pump
- No. of Syringes: 2
- Syringe Size: 10 µl - 140 ml ea.
KDS220 Infuse Only Syringe Pump
- No. of Syringes: 2, 4, 6, 8 or 10
- Syringe Size: Up to 10 syringes, 10 µl – 10 ml ea
- Up to six syringes, 20 ml – 60 ml
- One to four syringes, 100 ml – 140 ml
KDS250 Infuse Only Syringe Pump allows each syringe to be a different size
- No. of Syringes: 1-4
- Syringe Size: 10 µl-10 ml ea.
New KDS 100L Infuse Only Syringe Pump
- Single syringe 10 µl to 60 ml, any manufacturer
- Volume and flow rate units (µl/hr or ml/hr) are selected automatically based on syringe size
New KDS 100Y Infuse Only Syringe Pump
- Single syringe 10 µl to 60 ml, any manufacturer
- Volume and flow rate units (µl/hr or ml/hr) are selected automatically based on syringe size
© 2018 Vajra BioMetrix Pvt. Ltd. - All Rights Reserved
- Analytical Instruments
- Bio - Instruments
- Forensic Equipments
- Lab - Instruments
- Lab Consumable & Reagents
| Analytical-Instruments |
| Bio-Instruments |
| Forensic Equipments |
| Lab-Instruments |